K120G starting issue "weak gas"
#1
Thread Starter
My Feedback: (2)
K120G starting issue "weak gas"
Hi guys,
I need your help and/or advice. The turbine has 3 hours flight total time and I attempted today to start it after 5 months. During the starting sequence, after stage 3, it fails to start, it cuts down and "weak gas" is displayed on GSU. I make several attempts but with the same result. The turbine battery is LiFe 3s 9.9V 3650mah and it was 96% full with voltage 10.2V. I'm trying to figured out what the problem might be, any help will be much appreciated.
I need your help and/or advice. The turbine has 3 hours flight total time and I attempted today to start it after 5 months. During the starting sequence, after stage 3, it fails to start, it cuts down and "weak gas" is displayed on GSU. I make several attempts but with the same result. The turbine battery is LiFe 3s 9.9V 3650mah and it was 96% full with voltage 10.2V. I'm trying to figured out what the problem might be, any help will be much appreciated.